Laser Scanner Best Practices (2023)

  1. Last updated
  2. Save as PDF


Careful planning and understanding the principles of scanning are essential tocapturingaccurate and professional scans in an efficient and cost-effective manner. These guidelines will help you deal with common issues that many experience during scanning projects.


Site Sketch

A quick sketch of the scanning site can help save time and determine the optimal scanning locations. It will also help identify additional physical limitations that might impact a scanning project, such as obstructions, power needs, and additional equipment needs. If the project site is an existing outdoor structure, printing a Google Earth or other satellite image is a great way to organize a scanning strategy.

Laser Scanner Best Practices (2)

A hand-drawn sketch is also an effective tool.

Laser Scanner Best Practices (3)

File Naming

When setting up a larger project on a scanner, it is a good idea to identify areas that can be grouped as scan clusters to make registration easier. You can set project and subproject names in Manage > Projects/Clusters.

Give each scanning project, and folders within the project, names with meaning. For example, a case or job number, client name or number, or street locations.A multi-story building project could have the following file structure:

Laser Scanner Best Practices (4)

The easiest way to create this file structure on the scanner is to add subprojects and let the scanner automatically name each subproject and each scan.

Laser Scanner Best Practices (5)

Equipment Check

  • Check the scanner tripod to ensure that all legs lock securelyand that the scanner attaches correctly.
  • Check the outer casing of the scanner for any signs of damage or distortion.
  • Check the scanner mirror for dirt, scratches, cracks, and distortion. Click here for information about cleaning the Laser Scanner mirror.

Additional Equipment


Registration requires unique features in the scan location which can be used to align scans (angular road signs, doors, lamp posts, etc.). Locations, like a flat stretch of road or angular rooms require artificial targets to aid the scan registration process.

Target spheres can be placed in almost any location and can be scanned from any angle, making them a versatile choice for sites that lack surfaces to which paper targets can be attached. FARO spheres are rigorously produced and ideal for projects with a stricter accuracy threshold.

Laser Scanner Best Practices (6)

Checkerboard targets can easily be printed, labeled, and resized as needed, but they also mustbe attached to a flat surface and placed perpendicular to the scanner. Download printable checkerboard targets.

Laser Scanner Best Practices (7)

Coded markers function like checkerboards but contain an optical barcode with a unique number. These unique markers helpdetermine the scan location and ease automaticregistration. They can be printed after installing SCENE from <Installation Path>\RegistrationMarkers\RegistrationMarkersA4.pdf or downloaded from this page.

Laser Scanner Best Practices (8)

Target Placement

Artificial Target Guidelines

  • At least three targets are required for registration. (Two, if using sensor data, such as the inclinometer.)
  • Arrange targets so that there is a clear line of sight from the scanner to the targets.
  • Ensure that each target is visible from more than one scanner position.
  • Arrange targets in unique patterns in three dimensions by varying the height and spacing of the targets.
    Laser Scanner Best Practices (9)Laser Scanner Best Practices (10)
  • Do not move the targets during the scanning process.
  • For more information, read the target section of the SCENE Training Manual.

See Also

  • Target Alignment Guidelines for Laser Scanners
  • Reference Target Placement for Automatically Registering Scans in SCENE
  • Target Placement for Scanning Training Video using SCENE and the Focus3D Laser Scanner

Batteries/Extension Cords

Power needs will vary depending on the type of scanning project. Plan appropriately for battery charging time and outlet use as necessary. If the scanner will be plugged into an outlet during a lengthy scanning process, consider using a cord protector to prevent damage from tripping over power cords.

Accuracy Check

Placing an item with a known length such as a FARO Scale Bar or meter/yard stick in the first scan area is a good way to verify the accuracy of scans after registration is complete. For projects with a higher accuracy threshold,a FARO Scale Barhas a certified length of 1500mmwith additional documentation to support scan accuracy.

Laser Scanner Best Practices (11)

Additional Scanners

The handheld FARO Freestyle captures point data for smaller objects and spaces. Freestyle data can be registered with Focus data in SCENE.

Laser Scanner Best Practices (12)

Scanner Positioning

Number of Scanner Positions

Minimizing scanner positions will reduce scanning time and ensure point data is captured adequately. Use a site sketch to identify optimal scanning locations. Place the scanner in positions where each scan will overlap with another scan. Scan areas should containunique natural targets to help register the scans. Keep in mind that a full360° scan may not be necessary every time, depending on the object of interest. Be sure to scan transition areas like doorways to aid registration.

Line of Sight

Obstructions such as trees or columns will often require adjusting scanning positions to ensure all scanning data can be captured around the object. When working with multiple scans or scanners, make sure the scan areas overlap beyond the obstruction.

Laser Scanner Best Practices (13)

Angle to Object of Interest

Multiple scans captured from different angles provide the most complete three-dimensional image. Selecting proper angles can reduce the number of required scans. Position the scanner at angles to the object of interest that will give you the best line of sight for capturing the necessary details and ensure that scans contain overlapping areas.

Laser Scanner Best Practices (14)Laser Scanner Best Practices (15)


Avoid positioning the scanner so that the start/stop point is on the object of interest or an artificial target. The start/stop line or seam should face the area of least interest.

Laser Scanner Best Practices (16)

A simple rule of thumb is to make sure you are facing the object of interest when using the scanner touch screen, which is located on the side of the scanner.

Scan Order Matters

Scanning in a logical order will make registration much easier. Circling an object of interest or progressing linearlythrough a structure will make it easier to keep track of and register scans.The harder it is to follow the scan order on a sketch of the project area, the harder it will be to register the scans later.

Scan Plane

If the scan object of interest is resting on a moving plane, such as a boat on water, it is a good idea to have the scanner on the same plane of movement to prevent tiny movements from affecting measurement data.

ScanPlan and Scan Assist

The FARO handheld2D scanner, the ScanPlan, allows you to quickly make a map of a building floorplan. With the ScanPlan'sScan Assist mode, it will suggest the best possible locations for positioning your Focus scanner. For more information about using Scan Assist visit this article.

Scanner Settings

Scan Resolution

Scan resolution refers to the number of data points collected and the distance between those points.Choose a resolution based on the level of detail needed, the distance to the object of interest, and the distance to the targets.

General Resolution Guidelines

  • 1/1 or 1/2 - Objects and small areas
  • 1/4 or 1/5 - Outdoors and large, indoor spaces
  • 1/8 or 1/10 - Indoors and small, outdoor spaces

Scan Quality

Scan quality refers to the number of measurements the scanner makes to confirm point data. Increasing this setting increases scan accuracy but also increases scan time. The quality setting also employs noise reduction, an algorithm that determines if scan point differences are due to object detail or noise.

General Quality Guidelines

  • 2x –Optimal conditions (good lighting, good weather) and when time is a concern
  • 3x – Indoors or outdoors with overcast conditions
  • 4x – Outdoors in sunny conditions when range is needed, or in inclement weather


This setting can restrict the scan area of the scanner, allowing for 180° scans or other subsections.

Note: This setting is persistent, so remember to reset it when moving on to the next scan.


If a scan area is extremely dark or time is a factor, turning off color will reduce scan time.

Note: Some surfaces in a raw scan may appear washed out due to the near infrared nature of the scanner and the varying reflection/intensity values. When scans are colorized, these details should be visible.

Exposure Metering

  • Even Weighted: Ideal if lighting is relatively uniform, this setting uses light coming from the entire scene and takes less time.
  • Horizon Weighted: Best for scenes with bright overhead lighting, the camera uses light from the horizon level.
  • Zenith Weighted: Best for scenes where bright lighting comes from eye level or below, the camera uses light information from above.

Predefined Scan Profiles

The fastest way to determine project needs is to use the predefined scan profiles on the scanner.

Profile Use When Resolution Quality Color Sensors
Indoor ...10m Indoors, distance between scanner and object of interest is under 10m 1/8 3X On On
Indoor 10m... Indoors, distance between scanner and object of interest is over 10m 1/5 4X On On
Indoor HDR Indoors, distance between scanner and object is under 20m with HDR quality 1/5 4X On On
Outdoor ...20m Outdoor, distance between scanner and object of interest is under 20m 1/5 4X On On
Outdoor 20m... Outdoor, distance between scanner and object of interest is over 20m 1/4 4X On On
Outdoor HDR Outdoor, distance between scanner and object of interest is over 20m with HDR quality 1/4 4X On On
Preview Quick, low-res scan 1/16 4X Off Off
Object HD High-res scan 1/2 6X On On
Outdoor: Far Distances Distance between scanner and object of interest is over 20m, and measurement accuracy of objects closer to scanner isn't necessary. 1/4 4X On On

Predefined scan profiles can be altered as needed, and custom scan profiles can be added for individual needs.


Try to position the scanner so that its inclination is between +/-5°.An inclination warning icon in the status bar Laser Scanner Best Practices (17)is only visible when the current inclination of the scanner is above 2° (the icon becomes yellow) or the icon becomes red if the scanner is tilted more than 5°.

Laser Scanner Best Practices (18)

You can level your inclinometer by selecting Home > Parameters > Select Sensors. The view displays a bulls eye bubble level inclinometer as it would appear if mounted on top of the scanner.

Laser Scanner Best Practices (19)

You can enable or disable the automatic use of the inclination measurement of the inclinometer for the scan registration in SCENE. However, regardless of your setting, the data of this sensor is always measured and attached to each scan. If the use of the inclinometer data is switched ON, it will automatically be used to register the scans in SCENE; if it is switched off, the data will be ignored.

The inclinometer should be switched off, if you are scanning upside down.

Note: If you are scanning outdoors or in an area with unstable surfaces, double check the inclinometer bubble before moving to the next scan. Select Manage > Sensors > Inclinometer. If the inclinometer is in the Red Zone then re-level the scanner, check the tripod legs are secure and stable, then scan again.

On-Site Solutions

Inclement Weather

  • Rain - Decrease resolution to reduce the number of droplets scanned, and increase quality to confirm measurement data.
  • Fog - Increase resolution to 1/4 or 1/3 and use 3x, 4x quality.
  • High Winds - Lower tripod height, and use 8-to-10 pound sandbags to steady the tripod. Caution: Do not leave scanner unattended in high winds.
  • Heat - If operating in strong direct sunlight or temperatures over 40°C (104°F), a heatprotection cover can help protect the scanner and extend operation time.

Troublesome Surfaces

  • Bright – Bright surfaces can cause an increase in scan noise and loss of measurement data. Increasing scan quality will help reduce the impact of these surfaces. In more intense situations, try covering the surface with masking tape or painter's tape.
  • Reflective– Mirrors and other highly reflective surfaces can make scanning challenging. Covering these surfaces with brown paper or tape can minimize their impact.
  • Glass – Measuring through glass surfaces will not produce repeatable or accurate results. Unless the glass surface has very specific coatings, back reflections can occur and affect the radial measurements. Even if the glass surface does have proper coatings to prevent or minimize this, the glass has a different index of refraction than the air the beam is traveling through. This index of refraction change can result in an error in the radial distance measurement and will also result in the beam “bending” or no longer traveling a straight path from the tracker to the target. This bendingof the beam will affect the measurements from the scanner. The nature of the bend will also change as the angle the beam enters the glass window changes, resulting in a loss of both accuracy and repeatability.
  • Water– Water refracts light too much to return a reliable scan result and should be avoided.
  • Extremely Hot Surfaces – FARO scanners operate in infrared light. So, beyond the temperature of the target, what matters most is the luminance, or how much light within infrared spectrum it will emit. All items emit IR, and the amount of IR they emit increases as its temperature increases. Extremely hot items (in excess of several hundred degrees Celsius) will tend to emit more IR than they will reflect. At these extreme temperatures it's unlikely that all the laser power emitted from the scanner will reflect and return. This condition can result in missing and inaccurate scan data. In general we don’t recommend to scan any objects that are hotter than 500 °C, as the results are not predictable.

On-Site Registration

On-site registration enables the scan data, whether it be from a single scan or multiple scans in process simultaneously, to be wirelessly transmitted directly to an on-site PC and automatically aligned. Download the On-Site Registration Tutorial.

Scanner Safety

  • CAUTION: Do not leave the scanner unattended.
  • Limit traffic in the scan area as much as possible.
  • Make the scanner more noticeable by placing painter's tape along the tripod legs, or wrapping them in swimming noodles that have been trimmed to the correct size.
  • Use cord protectors to cover the power cord, ifit isattached to the scanner.
  • When moving the scanner on a tripod, always have one hand on the scanner.
  • For unstable ground (such as sand, loose dirt, or industrial grating), try using vibration suppression pads, inserting tripod legs into tennis balls, or placing the legs on top of old compact discs orfurniture sliders.

See Also

  • Training Manual for SCENE
  • User Manual for the Focus M70 and S70/S150/S350
  • User Manual for SCENE
Top Articles
Latest Posts
Article information

Author: Fredrick Kertzmann

Last Updated: 03/03/2023

Views: 6077

Rating: 4.6 / 5 (66 voted)

Reviews: 89% of readers found this page helpful

Author information

Name: Fredrick Kertzmann

Birthday: 2000-04-29

Address: Apt. 203 613 Huels Gateway, Ralphtown, LA 40204

Phone: +2135150832870

Job: Regional Design Producer

Hobby: Nordic skating, Lacemaking, Mountain biking, Rowing, Gardening, Water sports, role-playing games

Introduction: My name is Fredrick Kertzmann, I am a gleaming, encouraging, inexpensive, thankful, tender, quaint, precious person who loves writing and wants to share my knowledge and understanding with you.